Specification
Item
Data
Application
Vertical & Horizontal
Installation Mode
Add-on
Table diameter(mm)
Ø170
Inner diameter of mandrel sleeve(mm)
Ø40H7
Diameter of center through hole(mm)
Ø40
Table height (Horizontal)(mm)
245
Table T-slot width(mm)
12H7
Guide block width(mm)
18h7
Axis / Rotation
360°
Axis / Tilt
(-100°~+100°)
Transmission Mechanisms
Hybrid
Rotary Axis Transmission Mechanism
Worm & Worm Gear
Tilt Axis Transmission Mechanism
Worm & Worm Gear
Min. increment(deg.)
0.001
Rotation Axis Indexing precision(sec.)
20
Rotation Axis Repeatability(sec.)
6
Tilt Axis Indexing precision(sec.)
60
Tilt Axis Repeatability(sec.)
8
Rotation Axis Clamping system(kg/cm²)
Pneumatic (0.6 / 6)
Tilt Axis Clamping system(kg/cm²)
Pneumatic (0.6 / 6)
Rotation Axis Clamping torque(kgf · m)
245 / 25
Tilt Axis Clamping torque(kgf · m)
304 / 31
Rotation Axis Sever motor model(FANUC)(Straight shaft without key)(Taper)
αiS4 / βis4
Rotation Axis Sever motor model(MITSUBISHI)(Straight shaft without key)(Taper)
HG - 75 / 105
Tilt Axis Sever motor model(FANUC)(Straight shaft without key)(Taper)
αiF4 / βis8
Tilt Axis Sever motor model(MITSUBISHI)(Straight shaft without key)(Taper)
HG - 54 / 104
Rotation Axis Speed reduction ratio
1:72
Tilt Axis Speed reduction ratio
1:90 (Straight Shaft) / 1:120 (Taper Shaft)
Rotation Max. rotation rate of table(min-1)
33.3
Tilt Max. rotation rate of table(min-1)
25
Allowable inertia load capacity (Horizontal)(kg-m²)
0.22
Rotation Allowable workpiece load (0˚Horizontal)(kg)
60
Rotation Allowable workpiece load (0˚~90˚Tilt)(kg)
40
Rotation Allowable thrust load (with rotary table clamping) F (N / kgf)
5886 / 600
Rotation Allowable thrust load (with rotary table clamping) FxL (N.m / kgf·m)
304 / 31
Rotation Allowable thrust load (with rotary table clamping) FxL (N.m / kgf·m)
245 / 25
Driving torque(N.m / kgf·m)
177 / 18
Net weight ( sever motor excluded)(kg)
126
Dimension
