Specification
Item
Data
Application
Vertical & Horizontal
Installation Mode
Add-on
Table diameter(mm)
Ø320
Inner diameter of mandrel sleeve(mm)
Ø80H7
Diameter of center through hole(mm)
Ø80
Table height (Horizontal)(mm)
310
Table T-slot width(mm)
14H7
Guide block width(mm)
18h7
Axis / Rotation
360°
Axis / Tilt
-110°~+110°
Transmission Mechanisms
Roller Cam
Rotary Axis Transmission Mechanism
Roller Cam
Tilt Axis Transmission Mechanism
Roller Cam
Min. increment(deg.)
0.001
Rotation Axis Indexing precision(sec.)
20
Rotation Axis Repeatability(sec.)
6
Tilt Axis Indexing precision(sec.)
60
Tilt Axis Repeatability(sec.)
8
Rotation Axis Clamping system(kg/cm²)
Hydraulic (3.5 / 35)
Tilt Axis Clamping system(kg/cm²)
Hydraulic (3.5 / 35)
Rotation Axis Clamping torque(kgf · m)
687 / 70
Tilt Axis Clamping torque(kgf · m)
1717 / 175
Rotation Axis Sever motor model(FANUC)(Straight shaft without key)(Taper)
αiF8 / βis12
Rotation Axis Sever motor model(MITSUBISHI)(Straight shaft without key)(Taper)
HG - 154
Tilt Axis Sever motor model(FANUC)(Straight shaft without key)(Taper)
αiS12 / αiF12 / βis12
Tilt Axis Sever motor model(MITSUBISHI)(Straight shaft without key)(Taper)
HG - 204
Rotation Axis Speed reduction ratio
1 /60
Tilt Axis Speed reduction ratio
1 / 120
Rotation Axis Rated / Max. Speed (r.p.m)
50
Tilt Axis Rated / Max. Speed (r.p.m)
25
Rotation Max. rotation rate of table(min-1)
50
Tilt Max. rotation rate of table(min-1)
25
Allowable inertia load capacity (Horizontal)(kg-m²)
2.56
Rotation Allowable workpiece load (0˚Horizontal)(kg)
200
Rotation Allowable workpiece load (0˚~90˚Tilt)(kg)
150
Rotation Allowable thrust load (with rotary table clamping) F (N / kgf)
14715 / 1500
Rotation Allowable thrust load (with rotary table clamping) FxL (N.m / kgf·m)
1717 / 175
Rotation Allowable thrust load (with rotary table clamping) FxL (N.m / kgf·m)
687 / 70
Driving torque(N.m / kgf·m)
540 / 55
Net weight ( sever motor excluded)(kg)
580
Dimension
