Specification
Item
Data
Application
Vertical or Horizontal
Installation Mode
Add-on
Table diameter(mm)
Ø250
Inner diameter of mandrel sleeve(mm)
Ø46H7
Diameter of center through hole(mm)
Ø46H7
Table height (Horizontal)(mm)
160
Table T-slot width(mm)
12H7
Guide block width(mm)
18h7
Transmission Mechanisms
Direct Drive
Min. increment(deg.)
0.001
Cooling System
Free Cooling / Oil Cooling
Indexing precision(sec.)
20
Repeatability(sec.)
4
Clamping system (MPa / kg/cm²)
Pneumatic(6)
Clamping torque(N.m / kgf · m)
45
Servo motor model(FANUC)(Straight shaft without key)
FANUC Dis DD Motor
Speed reduction ratio
Direct Drive
Rated / Max. Speed(r.p.m)
200 / 300
Rated / Max. Cutting Torque)(Nm)
57(Oil Coolimg120) / 300
Allowable Inertia Load Capacity(kg-m²)
1.2
Allowable workpiece load (Vertical)(kg)
100
Allowable workpiece load (with support table)(kg)
100(Rated Speed)
Allowable thrust load (with rotary table clamping) F (N / kgf)
1000
Allowable thrust load (with rotary table clamping) FxL (N.m / kgf·m)
23.1
Net Weight (D.D motor included)
90
Dimension
